How To Glue Wood Together Without Clamps [13 Clever Ways]



  • Wipe up any glue that spills as soon as you can so it doesn’t dry.

    Thanks! Helpful Not Helpful

Submit a Tip
All tip submissions are carefully reviewed before being published

Thanks for submitting a tip for review!



Gluing Wood Together Using Masking Tape

Masking tape can make a good substitute for wooden clamps: especially if you want to glue small pieces of wood without clamps. This might not give your wood that much of a tight hold, but it will apply enough pressure needed to make a good joint.

The steps

Step 1: Lay your wood pieces, masking tape, and wood glue.

Step 2: Spread a good amount of glue on one side of the wood.

Step 3: Position and press the other piece of wood on the glued joint.

Step 4: Rip up enough masking tape and tape the two blocks of wood together. Wrap the tape tightly, then let the wood glue dry for as long as it takes.

What can you help me when the results of How To Lash Wood​ are not available at your site?

Normally, our site gives users dozens of results from every field in life. But it is so hard to give all of How To Lash Wood​ related content, so we always encourage users to send their suggestions for us to improve our site day by day. Contact us now, we will add the meaningful issues about How To Lash Wood​ in a moment.

Gluing Wood Using PVC Pipe

PVC pipes are a fantastic option for gluing wood without clamps. First, cut the PVC pipes into a quarter or half-inch thick. Next, slice around the pipe so you end up with c-shaped pieces. Then go ahead and glue your pieces of wood and clamp them with your improvised C-clamp.

4. Let the Glue Set

No matter what pieces you combined, the glue must set. Just like with any other glue, wood glue needs time to dry and properly cure. Do not mess with any excess glue immediately after application. Instead, let the glue dry for 30 minutes. After that 30 minutes is up, use a putty knife or chisel to scrape away extra glue. This technique ensures that the bond is strong, but it also removes excess glue.

After the 30 minutes is up, clamp the pieces together until the glue dries. For loose pieces of wood, you can use a C-clamp to clamp them together easily and securely. Unfortunately, some pieces will not be as easily clamped. You can be creative when trying to clamp the wood. Use a book, rubber band, or anything else that will keep the pieces together as they dry.

For large pieces of wood, you may need to use multiple clamps. This ensures that the glue dries evenly throughout the entire piece. Also, keep in mind that all glues will have different drying times. Check the packaging on your product to see approximately how long you need to wait.


Sometime after the magnetic lash innovation began, we saw magnetic liner strip lashes hit the market. While these do take a little more practice working with, the outcome can be neat. The user applies the liquid eyeliner to the eyelid, close to the lashline. Each strip has four small magnets along the base that attach to the liquid eyeliner. There are many brands, and surely each new version is better than the last. From our experience, these can feel a bit heavy and the liner is sometimes difficult to work with. It is a thicker formula than our fave liquid eyeliner pen, so we will admit to being somewhat spoiled when it comes to workability of eyeliner. All things considered, these can be a pretty, damage free option when applying them carefully and cleaning your eyes thoroughly after wearing them.

2. Read Your Glue’s Instructions

Once you buy your glue, be sure to read the instructions. Not all glues are the same. So, our advice may not be the best for your specific type of glue. Read the instructions to make sure you are using your product correctly and safely.


  • Glue is toxic if it’s eaten, so keep it away from children and pets. If anybody accidentally eats glue, contact poison control or get emergency medical treatment.[17]

    Thanks! Helpful Not Helpful